Attachment 93132

New from Axiom Motors:

We have specially designed these and they have been under testing for the last 6 months with no issues, so we have now decided to release them to the public.

You can order and see more pictures through the link below

http://www.axiommotors.com/Hop-Ups/A...gt2-p-766.html

For those that have QC rears, this is really nice to be able to run anything you want on either the front or rear of your vehicle, with only 1 rim to have your tire inventory can be more accommodating to track conditions

On special for 39.95 shipped (US orders)

Attachment 93133

Attachment 93134

Attached Images

   

Here's another one of my Custom BreadBoxes,
I have one almost finished for the HWCG site and in the meantime I'm showing you guys this one.
The DieCast Garage BreadBox Parts Truck!!!!!!!!!!!!!!!!!!!!!!!!!
Disassembled , Stripped and plenty of time spent bringing the condition of the body around to usable status.
Filed free of all imperfections, sanded with 220 and rubbed down with #3 Steel Wool.
These BreadBoxes were first primered and then shot Shimrin White.
The White one got a second layer of Interference Gold and was then Decaled and Detailed.
My Custom Cut Chrome Center Caps are used both on the factory wheels and headlights.
These Center Caps have sold out on nearly every Customs board on the Internet.
The Yellow Breadbox got a second coat of Intercoat Clear and Yellow Pearl Powder and was then Decaled and Detailed.
Both Bases had their wheels removed and then were shot with Duplicolor Adhesion Promoter.
One Base became BlueBlood (Red) and Black and the other is all Shimrin White.
Interiors were also AirBrushed.
Both are ClearCoated with HOK Urethane Clear and doses of Macro Pearl and Sparkle Gold Pearl.
All Products Used Are Exclusively House Of Kolor, Of Course!!!!!!!!!!!
No sticky Flame masks, Paint masks, or Gooey masks were used to create these sharp, clear, multi-layer graphics.
Again we see just how versatile well made InkJet Decals are over a variety of colors and inferior masks.
The full cap wrap of the front ends of these little gems really turns this casting around.
More Custom Scallop Decals created to perfectly fit this HW BreadBox.
Rivet Reassembly for a professional permanent status.

Stay tuned for the HWCG BreadBox,
--CadillacPat the UnCustomizer--
Keeping the ZING in CustomiZING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

New from MaxAmps:

Attachment 93096

MaxAmps 9000XL 11.1V Slash 4x4 Pack

There is no better pack than this for your Traxxas Slash 4x4 if you're looking for the ultimate combination of power and run time. This pack takes up the WHOLE tray, not just part of it, and gives you extra long run times while holding incredible voltage under load.

• 65+mph in most brushless setups(11.1 Volts)
• 54 minutes average runtime(9000mah Capacity)
• 45mm X 162mm X 39mm
• 60C - 5990 surge watts(540 amps)
• 654 grams
• 5C Fast Charge Capable
• Water-sealed for all-weather protection
• Built today with factory fresh cells
• We add the connectors and balancing taps for you
• Money Back Guarantee

Attachment 93097

MaxAmps 9000XL 7.4V Brushless Pair

There is no better 4S setup than this for your brushless E-Revo, E-Maxx, Summit, or Savage Flux. These packs take up the WHOLE tray, not just part of it, and give you extra long run time while holding incredible voltage under load.

• 40+mph in most brushless setups(7.4 Volts)
• 54 minutes average runtime(9000mah Capacity)
• 45mm X 162mm X 26mm
• 60C - 3990 surge watts(540 amps)
• 446 grams
• 5C Fast Charge Capable
• Water-sealed for all-weather protection
• Built today with factory fresh cells
• We add the connectors and balancing taps for you
• Money Back Guarantee

These packs will fit perfectly with no modifications required and will make your vehicle scream! There is no better choice!

Attachment 93098

MaxAmps 6000XL 11.1V Brushless Pair

There is no better 6S setup for your brushless E-Revo, E-Maxx, Summit, or Savage Flux if you're looking for the ultimate combination of power and run time. These packs take up the WHOLE tray, not just part of it, and give you extra long run time while holding incredible voltage under load.

• 65+mph in most brushless setups(11.1 Volts)
• 36 minutes average runtime(6000mah Capacity)
• 45mm X 162mm X 27mm
• 60C - 3990 surge watts(360 amps)
• 435 grams
• 5C Fast Charge Capable
• Water-sealed for all-weather protection
• Built today with factory fresh cells
• We add the connectors and balancing taps for you
• Money Back Guarantee

These packs will fit perfectly with no modifications required. If you're looking for an insane amount of power, these are the packs for you! There is no better choice!

MaxAmps builds your pack to order and ships it within 24-48 hours of placing your order on the website at www.MaxAmps.com

Attached Images

   

A collection of my videos...

Slash Spec @ Barnstormers

http://www.youtube.com/watch?v=gUgLRHhzyJI

Hey all I"ve been away from RC for roughly 20 months (the baby is 18 months old) and I'm looking to get back in. At the time I had vehicles that were getting long in the tooth and those were mostly Nitro, I did have one Electric an Associated TC3 I remembered I stopped driving it because it felt slow next to my nitro's but right now nitro but be a little messy to have around the house. The car is in great condition and I'm assuming a Battery, motor and ESC may give it the pep I'm looking for.

Without breaking the bank (<200) what should I look for NiMH, LiPo, Brushed Brushless etc

Current motor Associated 20T
ESC Associated LRP 17T limit
Batteries mix of 1500 to 2300 MaH NiCD and NiMH 6cell packs

Thanks

Novak has an excellent gearing chart on their website for properly gearing brushless motors. Just calculate your vehicles final drive ratio and make sure it's close to the numbers in the chart for your specific motor. Here is a screenshot of the chart.

Attached Images

 

New from JConcepts:

Attachment 93082

Attachment 93083

Attachment 93084

Attachment 93085

Attachment 93086

Attachment 93087

Illuzion Slash, Slash 4x4 and SC10 Manta body

Get ready, JConcepts is on a roll with this fierce new Manta body. Upon first glance, it is easy to visualize this new body gliding around on the Slash, Slash 4x4 or SC10. Scale meets performance with the new JConcepts Manta body, inspired from the ground up as a competition addict to turn short course trucks into high performance machines.

The Manta begins with the latest in short course truck detail by incorporating the latest treatment from JConcepts in grill and headlight design with a racing influenced front bumper. Front and rear fender flares provide the clearance necessary to run an assortment of short course tires including the 4-time National Champion Goose Bumps.

Extended cab design with recessed side windows, louvers along the front hood area highlight a number of the front-end styling cues. Short course inspired bed area with incredible detail finish off this extraordinary, tough design.

In addition, JConcepts has included an optional rear spoiler which gives the ability to alter the look and function of the Manta by simply adding or removing the rear spoiler. Maintaining that exclusive performance and feel is critical to a vehicles performance, JConcepts is world proven innovation and design.

Features:

• JConcepts – short course styling
• Scale inspired body, cab and window design
• Includes add-on rear spoiler for optional look and function
• Aggressive headlight and grill treatment with racing influenced front bumper
• Front and rear fender flares for maximum clearance
• Extended cab with recessed windows
• Clear heavy-duty polycarbonate with protective film
• Window masks and detailed decal sheet

Illuzion – Slash, Slash 4x4 and SC10 - Manta body
Part # - 0064
Retail price - $42.00
(Fits Traxxas Slash, Slash 4x4 and SC10)

Attached Images

      

Every year to celebrate the beginning of the Nascar season, my local track runs an oval track throughout the month of February.

This year all the guys who race X-Ray M18's or the HPI Micro RS4 decided to run Nascar bodies on our cars. We ordered up a bunch of the Bolink C.O.T. bodies.

Here is one of mine, unfortunately, to get it done and still do some of the bodies I have to get done for paying customers I kind of rushed it, and it shows in some areas. I still have one other to do but can't decide on the sponsor. Any ideas? It doesn't have to be a real Nascar sponsor.

Attachment 93080

New from Pro-Line:

For the 1:10 Off-Road Enthusiasts, pick your class, weather it's Mod, Stock or Gas truck, but when it comes to tires... the choice is clear, it's Pro-Line's Caliber 2.2" Truck Tires.

The Caliber takes tire technology to the next level by optimizing traction, control, balance, and tire wear with its dual-stage design. The smaller top pin penetrates through loose dirt while delivering unbelievable side and forward bite. The base pin works as a support for the top pin while acting as a dual-stage design once the top pin is worn down. You can rely on the base pin for greater tread life wear and it works well on those tracks that are prone to blue-groove or have a super clean surface.

Tire Features:

• Dual-stage pin design for exceptional tread life
• Small top pin for light to heavy loose dirt
• Base pin extraordinary on hard-packed/blue-groove surfaces
• Square-lug technology throughout the tread design
• Non directional tread design
• Available in World Championship/extremely proprietary M2 (Medium) and M3 (Soft) compounds
• Internal sidewall ringing for lateral support and increased cornering control
• Cut foam included

What's Included:

• Caliber 2.2" truck tires (2 pieces)
• Cut foam inserts (2 pieces)

Fits:

• All 2.2" Truck Wheels (1:10 Truck Wheels)

Part # 8209-02
Caliber 2.2" M3 (Soft) Off-Road Truck Tires
Price $21.50 pair
Estimated Ship Date: 2-15-10

Attached Images