My RC Car Club

Attachment 94209

New from Novak:

Irvine, CA – March 10, 2010 – Novak has combined one of its popular Havoc speed controls with its top-of-the-line, ROARapproved Ballistic Spec motor to create the perfect system for power-hungry drivers. The Havoc 3S/Ballistic Brushless Systems with Traxxas® Plug – 10.5T (#3080), 13.5T (#3081) and 17.5T (#3082) are equipped with a high-current handling, Traxxas®-compatible battery connector for easy, race-ready installation. In other words, no soldering! To simplify installation further, the Havoc 3S/Ballistic Systems include gold-plated bullet motor plugs, which eliminate tricky wiring situations and allow the system to be easily removed from the vehicle without soldering. Additionally, this system is compatible with a wide range of battery types, including 2S-3S Li-Po packs. Simply plug in your battery, and you’re set to break some track records! In fact, the Havoc 3S/Ballistic system is one of the fastest upgrades available. Its sensored design creates a significantly smoother ride than a sensorless system, plus it has a more consistent throttle response – perfect for racing. This system is an ideal fit for any 1/10-scale off-road, on-road or short-course vehicle, including Traxxas’® Slash™ Short-Course Trucks, Traxxas’® Stampede™ Monster Truck, Traxxas’® Rustler™ Stadium Truck or Traxxas’®
Bandit™ Buggy.

ONE-TOUCH™ AND GO!

The Havoc 3S has the easiest ESC/transmitter calibration available. A simple push of the One-Touch™ button activates a fast, durable and versatile speed control that is incredibly simple to operate and is ideal for 2-3S Li-Po bashing and racing applications. For example, the Havoc 3S automatically detects – through Novak’s auto-detect Li-Po software – whether a 2S or 3S Li-Po battery is connected. This feature is part of the reason that the Havoc 3S has such a remarkably speedy reputation. This flexible ESC is also compatible with conventional brushed motors for a different style of racing. For those interested in fine tuning, the Havoc 3S ESC features a simple interface with nine adjustable parameters, such as Throttle Curve and Brake Frequency. The Havoc 3S is also extremely durable with a highly water-resistant case that stands up to any type of weather. It also contains one of the strongest BECs for sport applications and includes Li-Po Cut-Off Circuitry that protects your batteries from damage. Additionally, the Havoc 3S’s small footprint and low cost make it a perfect complement for any 1/10-scale electric vehicle, such as HPI’s® Blitz™ Short-Course Truck and E-Firestorm™ Stadium Truck, and Associated’s® SC10™ Short-Course Truck, RC10B4™ Buggy and RC10T4™ Truck.

FLAWLESSLY FAST

But the exciting features don’t end there. Each Ballistic Spec motor includes a color-coded, hand-wound stator to easily identify the number of motor winds, perfect for spec racing. In fact, the Ballistic motors are so versatile that any turn from 8.5 through 25.5 (#S6608-#S6625) can be installed to alter the motor’s speed. Drivers can go from wild to mild in a few quick steps. This motor will adapt to any driver as he or she progresses. Additionally, these motors include all the must-have features to solidify their status as superior racing machines. Each Ballistic Spec motor is ROAR approved and includes a nickelplated sintered Neodymium rotor for maximum motor acceleration, braking power and performance in high-temperature conditions. And like all of Novak’s innovative Ballistic motors, these motors are also completely rebuildable with dozens of replaceable parts available, which will enhance your motor investment.

WILD-TO-MILD MOTOR

By simply switching a stator, drivers can customize their motor for any type of racing.

Attachment 94210

COMPREHENSIVE CUSTOMER SERVICE

In addition, Novak boasts one of the best customer-support teams available in the R/C industry. Highly trained technical and customer-support operators are available throughout the week to answer any product or customer-related question. Additionally, Novak offers the most comprehensive service and trade-in program available. Check out the Customer Service page on Novak’s Web site for more information.

For installation assistance, check out Novak’s easy-to-follow videos on “How to Install a Hand-Wound Stator” and “How to Install a Sensored Brushless System into a Traxxas® Slash™ .”

Novak’s Havoc 3S/Ballistic Brushless Systems with Traxxas® Plug (#3080-#3082) are scheduled to ship in April 2010. For features and specifications on the Havoc 3S/Ballistic Spec Brushless Systems with Traxxas® Plug, please visit the Novak Web site (www.teamnovak.com).

Attachment 94211

Attachment 94212

Attachment 94213

Attached Images

     

Attachment 94208

New from JConcepts:

The JConcepts Double Dees V2 tire is perfect for a variety of track surfaces. Wear is always the trade off when going to a small pin tire and with the Double Dees V2, these worries are a thing of the past. Running qualifiers and main events on the same high performance tire is now possible. The Double Dees design is a world leading tire combination right out of the package, the unique technology combined with the sticky yellow and blue compound allow the flexibility necessary to compete on even the most demanding surfaces for an extended period of time.

Tires including inserts will be treated to the latest generation in Profiled (closed cell) insert design. Unique materials, bright blue color and revolved relief provide extra full support and stability.

The roots of the V2 design came after extensive research and development which called for a longer lasting and supremely stable variation of the original Double Dees design. Several inclusions to the design include, extra depth and height tread with extended center bar coverage for additional forward traction. If you are looking for the ultimate 1/8th buggy performance tire the Double Dees V2 is it.

Double Dees excel on indoor and outdoor hard packed surfaces with either dry or wet conditions. Drivers will feel the immediate impact of the exclusive design and proprietary rubber compound as they rip around the track at blistering speeds.

Features:

• Available in sticky Yellow and Blue medium and soft compounds
• Compact tire body with crisp tread and separation
• Aggressive square Double Dee lug technology
• Available with and without inserts
• Tires with inserts include Profiled (closed cell inserts)

Double Dees V2 - yellow compound - tire only
Part # - 3007V2-000
Retail price - $20.00
(Fits all 1/8th buggy wheels)

Double Dees V2 - yellow compound
Part # - 3007V2-00
Retail price - $24.00
(Fits all 1/8th buggy wheels)

Double Dees V2 - blue compound - tire only
Part # - 3007V2-001
Retail price - $22.00
(Fits all 1/8th buggy wheels)

Double Dees V2 - blue compound
Part # - 3007V2-01
Retail price - $26.00
(Fits all 1/8th buggy wheels)

Double Dees V2 - blue compound - white wheel - (pre-mounted)
Part # - 3007V2-11
Retail price - $40.00
(Fits all 1/8th buggies)

Double Dees V2 - blue compound - yellow wheel - (pre-mounted)
Part # - 3007V2-21
Retail price - $40.00
(Fits all 1/8th buggies)

Attachment 94203

Attachment 94204

Attachment 94205

Attachment 94206

Attachment 94207

Attached Images

      

Looking for your thoughts and opinions on a few things.

1st I got to say I like the site alot, alot of info. a bit of history on me Im 32 yrs old and used to race rc cars from ages 12-18, and havnt done much since. 1st car was a Kyosho ultima II, high rider corvette, TRX-1 buggy. I still have the TRX-1 and its in running order.

So im looking to get back into it.

1st: could I hook up the TRX-1 with a brushless setup, just wondering?

2nd: Im leaning towards a buggy I have always been partial to them, and it just seems like everyone runs truck,truggies. So I have been looking at all the options for buggys, I want brushless setup for sure that I know and i think 1/10th scale. At the speeds these cars run today should I go with a 4x4 buggy for handling purposes, or does a 2 whl dr handle as good with the right setup? is 4 whl dr more popular these days?

3rd: I was looking at the Bandit VXL with the 2.4 radio, a few freinds have the Traxxas Slash trucks and love them. I have had good luck with traxxas in the past, so just wanted some opinions. ( I know some hate traxxas and some like them, just like ford and chevy)
any insight would be great, I will be racing and just messing around

Thanks in advanced

I have the 2WD SC10 and 4WD slash for my son, but I would love to have a 4WD SC10 for myself. Any news on AE coming out with one?

Attachment 94181

New from Team Durango:

The R spec of DEX410 will be released end of April (earliest) ; the DEX410R will have a street price of US$350, €230 and £210 (these prices all exclude local sales taxes/VAT)

The DEX410R shares the same Team Durango DNA, performance and innovation of the DEX410, but with a more ‘regular’ spec.

Team Durango ‘R’ means performance and innovation, combined with affordability and an accessible, personal upgrade path.

Attachment 94182

Attachment 94183

Attachment 94184

Attachment 94185

Attachment 94186

Attached Images

      

Attachment 94179

Latest race news from Losi:

The 2010 Psycho Nitro Blast in Atlanta, GA drew over 400 entries. Losi drivers Adam Drake, Gene Hickerson and Mike Truhe competed in the 1/8 Pro Buggy, 1/8 Electric Buggy and 1/8 Pro Truck classes.

Each class included three rounds of qualifying. Adam was the top qualifier in all three rounds in the 1/8 Pro Buggy, 1/8 Electric Buggy and 1/8 Pro Truck classes.

In the 1/8 Pro Buggy final Adam finished in first place, with Mike finishing in third place. Both drivers were competing with Team Losi Racing 8IGHT 2.0 Buggy Race Rollers equipped with Losi tires and Nitrotane fuel.

In the 1/8 Electric Buggy final Adam took first place and Gene finished in second place. Both drivers were competing with Team Losi Racing’s 8IGHT-E 2.0 Buggy Race Roller. Adam completed his buggy with an Xcelorin Brushess System, Xcelorin LiPo battery and Losi tires.

Congratulations to all three drivers on their outstanding performance!

Attachment 94180

Attached Images

  

Ok i am writing this quick guide to helkp those of that maybe new to the whole plotter scene.....I am basing this on what i use which is a craft robo plotter.

On the Craft Robo you can use jpeg images to make stickers ,paint masks,etc...as well as most plotters

This was my dilema, alot od the images I wanted to use were eps files in which the craft robo wouldnt read with out a program like paint shop pro or adobe photo elements.....times are tough so i wasnt about to go spend $100 on adobe photo elements......so I did a little searching on the internet and came across this

http://epsconvert.com/search.aspx

its 100% free and it converts your eps files to jpeg or other types of files.

Heres a quick run down on how to use it:
first click the upload button
this will take you to another screen where 1 box says "browse",click on this
now this will take you to a sub box of your computer...my documents,my pictures ,etc
ok say you have a image of a batman symbol, click on that and it will take you back to the screen with that "browse" box,in the long box next to where it says "browse", its gonna contain the image location of the batman symbol,underneath this,you will see a upload button,click on this
it takes a second to upload
now when you upload it,its gonna look likeof what reminds you of a "ebay" auction:
you will see the image,the file name and so forth
now click on your batman picture there
now it will bring up your picture, NOW heres the tricky part but its easy so pay attention:
now you will see select file format with a red drop box next to it
click on that drop box and change the file extension to what you need,so in this case you will click on jpeg
when you change the image,it will disappear for a second and come back!
NOW after doing that,right click on the image, go to "save picture as" and your computer sub box will come up again.You can rename the file and save it to where you want to and presto you are done!!!!what i personally do is save them in "my pictures"hope this helps some peoplel out with there plotters.this might not work for all plotters but I know it will work with the craft robo

Attachment 94178

Latest driver news from Jammin:

Everyone at Jammin Products would like to thank Taylor James for all his hard work and dedication toward the growth and success of Jammin Products. "It is with regret that Taylor will possibly move to another team due to the lack of support from our affiliates. I think Taylor is a great guy and really enjoyed having him on the team and most of all I'm glad to be his friend." says Jay Halsey.

Taylor is currently looking at his options within the R/C industry while continuing his full time college education. No matter what he decides, he will be a great asset to the industry. Thank you Taylor !

Attached Images

 

Attachment 94176

New from TCS Crawlers:

TCS Crawlers U-Trail (Micro Trail) for the Losi Micro. Made from delrin. Includes two side rails only. The rest of the truck is not included.

SKU18112 - $19.99

Attachment 94177

Attached Images

  

WE ARE HAVING A RACE AT
AIRWAY LANES 4825 Highland Road
Waterford, MI 48328 april 17th FROM
1-5 PM $10.00 ENTRY FEE

BRING YOUR SAND PADDLES
HAVE SOME FUN

PRIZES AVAILABLE FOR THE WINNERS AND A RAFFLE FOR ALL

IF YOU ARE RUNNING SPI

WHEELS YOU WILL GET CASH

PRIZE MONEY FOR 1ST ,SECOND

AND THIRD PLACE